Posts Tagged ‘PC3 USB’

Dynojet Motorcycle Quick Shifter Sensors for PC3 USB Applications

Thursday, June 11th, 2009

Dynojet Motorcycle Quick Shifter Sensors for PC3 USB Applications. Normally during “up shifting” you must roll off of the throttle and pull in the clutch in order to engage the next higher gear. In racing (both drag and road race), split seconds count. Rolling off the throttle, even slightly, slows your times and can be the difference between winning and losing. The Dynojet Quick Shifter (DQS) allows full throttle, clutch less shifting. This is done by momentarily cutting the fuel and or ignition, which unloads the transmission. During this time, the rider can shift up to the next gear without rolling off the throttle or using the clutch. The Power Commander incorporates all of the Quick Shifter functionality in with the main fuel controller and is fully programmable*. No cutting or splicing of your bike’s wiring harness is necessary. The amount of “kill time” is adjustable by the user via the provided software. The user can also set a minimum rpm for the system to function. This keeps the system from activating at too low of an rpm, such as low speed road riding. Motorcycle Performance parts from the number one source McCoy Motorsports.

DynoJet Power Commander PC3 USB for the Yamaha FZ1 06-08

Thursday, May 14th, 2009

Now available from McCoy Motorsports the motorcycle performance leader, the DynoJet Power Commander PC3 USB for the Yamaha FZ1 06-08 model years. The Power Commander IIIusb was introduced in 2003 and utilizes the same “direct injector control” technology as the PCIII. The USB (Universal Serial Bus) port provides an instant, no-hassle way to connect the Power Commander module to a computer. This model also features an expansion port for future add-on modules like an ignition module and quick shifters.