Ducati Multistrada1200 Plug-n-Play LED Tail Light 10-14

Ducati Multistrada1200 Plug-n-Play LED Tail Light 10-14

Ducati Multistrada1200 Plug-n-Play LED Tail Light 10-14

Our Price: $159.99

Part NumberCLEDDucati Comp Mult
Ducati Multistrada 1200 Blaster-X Integrated LED Tail Light Complete Unit Plug-N-Play 2010-2014 High Performance Integrated LED Tail Light. This is an ultra-high intensity, high-performance, Microprocessor controlled Complete Plug-N-Play Integrated LED Tail Light for the 2010, 2011, 2012, 2013 and 2014 Ducati Multistrada 1200. This Custom LED Taillight for the Ducati Multistrada 1200 2010-2014 is a complete plug and play unit with Clear lens, Amber Turn Signals, and OEM connectors. It is also available as a retrofit kit to be installed into the OEM housing, on a seperate ToBeFast.com listing.


The Custom LED tail light for your Ducati 2010, 2011, 2012 , 2013 and 2014 Multistrada 1200 features our proprietary and patented Blaster-X, Brake Alert, Turn Alert and Strobe Mode! With this Custom LED product your turn signals are built right into the tail light! It's the best fender eliminator money can buy.

Custom LED is a pioneer in the art and science of LED tail light integration. Do not waste your money on cheap imitations and half hearted solutions. Do it right from the start with Custom LED. Our products are designed, manufactured and assembled at Custom LED right here in the USA. You will notice a significant difference in quality, performance, and features with Custom LED.


  • Plug-and-Play installation with OEM connectors (tail light AND turn signals).
  • FULL CANBus Compatibility for running, brake AND turn signal circuits (normal blink rate, no bulb-out warnings).
  • OEM Fit with high quality clear lens (want smoked lens?).
  • 32 Ultra Bright Red LEDs for running and brake lights.
  • 32 Ultra Bright Yellow LEDs for turn signals.
  • Stealth black boards for inconspicuous appearance.
  • The Custom LED ColorChange and Blaster-X PWM Technology on-board.
  • Custom LED Strobe Mode!
  • Custom LED Brake Alert with multiple user-selectable brake modulations!
  • Custom LED Turn Alert
  • New 2nd Generation Programming Interface allows users to easily customize features!
  • New Sure-Blink Technology
  • Robust regulated design for consistent and reliable performance.
  • 2-year Warranty
  • NOT DOT approved.


    This is an ultra-high intensity, high-performance Integrated LED Tail Light for the 2010-2014 Ducati Multistrada 2010-2014. This Custom LED Tail Light is a high quality complete plug and play unit with clear lens and OEM connectors. This product directly replaces the OEM tail light on your Ducati Multistrada without any physical modification necessary. The lens quality is equivalent to the OEM unit it replaces.

    The Custom LED 2010, 2011, 2012, 2013 and 2014 Ducati Multistrada Integrated LED Tail Light features black "stealth" electronics and rear lens assembly for a smoked look, without any loss of performance! The lens is optically clear, yet has a smoked appearance compared to standard integrated LED tail lights. This allows for visual appeal of a smoked tail light lens, without sacrificing any performance or safety that smoked tail lights certainly lose.

    Brake Alert automatically provides a few quick ultra-bright strobe pulses of light the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists! The number of pulses can be user-configured VIA our new Programming Interface! It can also be disabled if desired.

    NEW! Turn Alert is a NEW approach to our integrated LED tail light operation. Typically, and integrated tail light will switch between yellow and red on the side you are indicating a turn. This only creates a color contrast. With Turn Alert, the tail light cycles between full intensity yellow, and OFF, on that side. Therefore, there is a full contrast turn signal operation on that side. The red running light will resume on that side once the turn signal is canceled. If braking and turning, the red will illuminate fully in between blink cycles - because braking should have priority.

    Strobe Mode is a feature that puts the taillight into a devastating strobe cycle that is sure to get anyone's attention. This mode produces Insanely Bright pulses of light at ultra high frequencies, in alternating patterns across the tail light. Strobe mode is engaged by grounding a control wire, and can be engaged at any time.

    Blaster-X is our proprietary pulse-width-modulation (PWM) technology that squeezes the maximum possible illumination power out of LEDs. The result is a significantly less expensive, yet even more outstanding and effective product than it's predecessors - and widens our advantage over our competitors.

    NEW This product also marks the introduction of our NEW Programming Interface which allows users to easily customize features of the tail light! The customizable features menu allows users to:

    1. Enable or Disable the Startup Sequence.
    2. Set the number of pulses in the Brake Alert feature (can set to zero to disable Brake Alert).
    3. Adjust the running light brightness within a preset range.
    4. Adjust the brake light brightness within a preset range.
    5. Engage Demo Mode, where the tail light cycles through all functions automatically and repeatedly!
    6. Reset factory defaults.

      This programming interface is accessed very simply through the Strobe Mode control wire! The interface is designed to receive input simply by providing ground pulses to the strobe mode control wire. No special equipment is necessary to access and utilize the programming interface! Detailed programming instructions will ship with every unit.

      NEW! And last but not least, our Sure-Blink Technology. Our Custom LEDIntegrated Tail Lights for the Ducati Multistrada are designed to follow the turn signal commands of the motorcycles flasher relay. This insures it is compatible with all after market and OEM flasher relays - especially programmable relays such as our ELFR-P. However, in the event that the tail light receives a command to turn that does not break (blink) within a preset time period, the tail light will automatically blink that side. This feature is most useful in preventing common no-blink problems that are associated with retrofitting motorcycles to LEDs. Also, in keeping with this effort, we have also built in our ever popular Stage I Load Equalizers into this tail light!

      This high performance Integrated tail light utilizes 24 Ultra Bright Red LEDs and 24 Ultra Bright Yellow LEDs - compared to only 21 red LEDs on the stock circuit board! These LEDs effectively handle the functions of: Running Light (red), Brake Light (red) and Turn Signals (amber) - all within the tail light housing!

      Just as on the other Custom LED Integrated LED Tail Light models, the system is designed so that the red LEDs turn off (on the turn side) when the yellow LEDs come on, so that the turn indication is a pure and distinguishable yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

      The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, Your Italian machine deserves the BEST, do it the right way from the start, with Custom LED Tail Lights for your Ducati Multistrada.

      If you would like to find out more information as to Custom LED's design concepts for the Integrated LED Tail Lights, and the purpose of them, read this introduction to Custom LED's Integrated LED Tail Lights.


      • Ducati Multistrada 1200 2010
      • Ducati Multistrada 1200 2011
      • Ducati Multistrada 1200 2012
      • Ducati Multistrada 1200 2013
      • Ducati Multistrada 1200 2014

  • Send to friend

    Product rating

    Customer Reviews

    There have been no reviews for this product.

    Street Bike Parts and Accessories



    Contact Our Team: 606-432-1556