Custom LED Magic Blinker. The new version (REV2) of our popular Magic Blinkers have the following improvements:
- New high-speed solid state design is compatible with all flasher relays.
- Stage I Load Equalizer on-board eliminates the no-blink condition.
- Even smaller package than previous version.
The Custom LED Magic Blinker is designed to allow single filament light bulbs, single intensity LED assemblies, or any two-wire indicators to function as both running lights AND blinkers - at full brightness! Simply connect your single filament bulb or LED to the Custom LED Magic Blinker and your indicator bulbs/LEDs will now stay on constantly as running lights, and blink when you engage the blinkers!
Note: the indicator will turn off for the duration of the blinker pulse - this is how the blinking is achieved.
The Custom LED Magic Blinkers are designed to be as small as possible while being as versatile and robust as possible. The finished dimensions of the unit will measure approximately 0.7" x 1.25" X 0.25" and can carry up to 5A (-65W) of current! This ensures our product will work for any application (blinking your headlights individually, or powering one single LED signal for instance).
To further ease installation and ensure dependability, the Custom LED Magic Blinkers are entirely water resistant.
The Magic Blinkers are applicable for any and all situations where a single filament lamp, or single brightness LED or LED cluster is desired to function as both a running light and a blinker light.
The Magic Blinkers come with 7" leads, all required electrical connectors and detailed installation instructions!
NOTE: THE NEW AND IMPROVED MAGIC BLINKER IS COMPATIBLE WITH ALL FLASHER RELAYS.
TECHNICAL: Installation PDF:
www.tobefast.com/Custom_LED_Magic_Blinker_-_Instructions.pdf
GENERAL NOTE: For motorcycles that do not have running lights in the front of their motorcycle (such as the new Kawasaki sportbikes) , the red wire on the magic blinker must be connected to an ignition switched source for proper operation. The headlight source is perfect for this.
HONDA BLINKER SYSTEM SPECIAL NOTE: In order to properly utilize the Custom LED Magic Blinkers on the Honda CBR 1000RR, years 2004 and newer, (as well as numerous other Honda motorcycle models) the constant power input wire (red) must be connected to a ignition switched source (other than that for the stock blinkers). The headlight source is perfect for this. The problem is that the running light wire that runs to the blinkers cuts off when the blinkers are activated, and stays off until the blinkers are canceled. This causes the operated load (LEDs or lamps) to not work properly as the Magic Blinkers are designed to draw all power from the "running light" input wire.
Using a voltmeter, you can easily verify if you are having this problem. Simply measure the voltage on the RED input wire on the Magic Blinker to check for constant 12V power - blinkers on or off.
