Custom LED Electronic Motorcycle Blinker Load Equalizer Stage 1

The Stage I Load Equalizer is for you if the following is true: You changed your incandescent bulbs to LEDs and now: the blinkers do not blink at all - either they turn on and stay on solid or they don't even come on at all. The left and right directional signals illuminate at the same time when activated and you want to correct the problem so the blinkers blink again but faster than normal.

The Stage I Load Equalizer adds just enough load to the system to make the blinker system with the stock flasher relay operate properly again with your LEDs installed. Please note that the blinkers will probably blink fast though. If you want to slow them down to normal, you will need to go to the Stage II Load Equalizer.

The Stage I Load Equalizer couldn't be easier to install! The device is very small and connects to the blinker wires. Your order will come with detailed instructions and simple tap connectors that do not require any cutting or splicing of the factory wiring!

For most applications, one pair of the Stage I Load Equalizer are sufficient.

Great when used with the CBR 954rr, CBR 1000rr and CBR 600rr Custom LED kits.