R1 Lights by Custom LED for Yamaha R1 2009 Blaster-X Integrated LED Tail Light Complete Unit. R1 Lights for High Performance Integrated LED Tail Light
This Yamaha R1 Tail Light product features Custom LED's proprietary and patented Blaster-X, Brake Alert and Strobe Mode! With this Yamaha R1 Lights for your Sportbike Tail Lights product, your turn signals are built right into the tail light! It's the best yamaha r1 fender eliminator money can buy.
Custom LED is a pioneer in the art and science of LED tail light integration. Do not waste your money on cheap imitations and half hearted solutions. Do it right from the start with Custom LED Tail Lights. At Custom Led our products are designed, manufactured and assembled right here in the USA. You will notice a significant difference in quality, performance, and features with Custom LED.
This R1 Lights sportbike tail light product installs into your bike with a Plug N Play Complete Tail Light assembly and harness replacing the factory tail light and lens. Instruction included with purchase.
- Custom Led Yamaha R1 Tail Light Features our Microprocessor based Blaster-X Technology with Brake Alert and Strobe Mode built in!
- Custom Led New Programming Interface allows users to easily customize features!
- Custom Led R1 Lights New Sure-Blink Technology
- Custom Led Recommended accessory: ELFR-1 Flasher Relay
- Custom Leds R1 Lights are Made in the USA!
- Custom Led has a 2-year Warranty from time of purchase on all R1 Lights!
These R1 Lights are an ultra-high intensity, high-performance Integrated LED Tail Light for the 2009 Yamaha YZF-R1. This product is designed to directly replace the complete tail light of the 2009 Yamaha YZF-R1 OEM tail light and brought to your by ToBeFast.com Website for Purchase.
The Custom LED 2009 Yamaha YZF-R1 Integrated LED Tail Light now features the latest version of our proprietary and patented Blaster-X technology with Sportbike Brake Alert and Strobe Mode! With our R1 Lights, your turn signals are built right into the tail light! It's the Street Bike fender eliminator money can buy.
Custom Led Brake Alert automatically provides three quick pulses of light the instant the brakes are applied. This helps alert motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists!
Custom Led Strobe Mode is a feature that puts the taillight into a devastating strobe cycle that is sure to get anyone's attention. This mode produces insanely bright pulses of light at ultra high frequencies, in alternating patterns across the tail light. Strobe mode is engaged by grounding a control wire, and can be engaged at any time.
Custom Led Blaster-X is our proprietary pulse-width-modulation (PWM) technology that squeezes the maximum possible illumination power out of LEDs. The result is a significantly less expensive, yet even more outstanding and effective product than it's predecessors - and widens our advantage over our competitors.
Custom Led NEW! This product also marks the introduction of our NEW Programming Interface which allows users to easily customize features of the tail light! The customizable features menu allows users to:
- Custom Led Enable or Disable the Startup Sequence.
- Custom Led Set the number of pulses in the Brake Alert feature (can set to zero to disable Brake Alert).
- Custom Led Adjust the running R1 light brightness within a preset range
- Custom Led Adjust the brake light brightness within a preset range
- Custom Led Engage Demo Mode, where the tail light cycles through all functions automatically and repeatedly!
- Custom Led 1 lights resets factory defaults
This Custom Led R1 Lights programming interface is accessed very simply through the Strobe Mode control wire! The interface is designed to receive input simply by providing ground pulses to the strobe mode control wire. No special equipment is necessary to access and utilize the programming interface! Detailed yamaha r1 tail light programming instructions will ship with every unit.
NEW! And last but not least, our Custom Led Sure-Blink Technology. Our Integrated Tail Lights are designed to follow the turn signal commands of the motorcycles flasher relay. This insures it is compatible with all after market and OEM flasher relays - especially programmable relays such as our ELFR-P. However, in the event that the tail light receives a command to blink that does not break (blink) within a preset time period, the tail light will automatically blink that side. This feature is most useful in preventing common no-blink problems that are associated with retrofitting motorcycles to LEDs. Also, in keeping with this effort, we have also built in our ever popular Custom Led Stage I Load Equalizers into this tail light!
This high performance Integrated yamaha r1 tail light utilizes 32 Ultra Bright Red LEDs and 32 Ultra Bright Yellow LEDs - compared to only 21 red LEDs on the stock circuit board! These LEDs effectively handle the functions of: Running Light (red), Brake Light (red) and Turn Signals (amber) - all within the tail light housing!
Just as on the other Custom LED Integrated LED Tail Light models, the system is designed so that the red LEDs turn off (on the turn side) when the yellow LEDs come on, so that the turn indication is a pure and distinguishable yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.
The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.
Click here to download the installation instructions in Adobe PDF format.
