| Now you can fix the flash rate on your motorcycle with our unique Plug And Play solution! That's right, the Electronic LED Flasher relay directly replaces the stock flasher relay on most Yamaha, Honda and Kawasaki motorcycles! See the compatibility list below. For motorcycles with non-standard two wire flasher relays (not on compatibility list), this flasher relay can still be used by removing the connector and hard wiring it. Even three wire flasher relays can be replaced if one of the wires is a ground wire. This unit is guaranteed to replace any two-wire flasher relay and operate at the normal DOT blink rate for motorcycles with stock blinkers, or all LED blinkers or any combination of both. (Some Honda motorcycles have their OEM flasher relays integrated into other electronics and therefore can not be replaced). This flasher relay operates properly, at the standard DOT blink rate, from 0.05A to 10A loads (0.6 Watts to 120 Watts!) - which basically covers any combination of ALL blinker products on the market! FITMENT INCLUDES - Yamaha: YZF-R1, YZF-R6, YZF600, FZ-1, FJR1300. Honda: CBR1000RR, RC-51, CBR600F4i, CB919, ST1300, GL1500, CBR1100XX, CBR900RR, CBR929RR, CBR600F2, CBR600F3, CBR600F4, VTR1000R Super Hawk, VT600, 02-04 1800 C, 02-03 1800 R models, 02-03 1800 S models, 04-05 1300 C models, 03-05 1300 S models, 05 1300 R models. Kawasaki: ZX-10R, ZX-12R, ZX-6R(R) up to 04, Z-1000, ZXR1200(1100), ZZR1200, ZX1200, ZR-7. Suzuki: All late model GSXR's with two-wire replaceable flasher relays are also compatable, but require a hard-wire installation. Ducati: 996 - hard wire installation as follows when replacing OEM relay with our Electronic LED Flasher Relay: (Motorcycle Light Blue (LB) gets connected to the ELFR-1 Red wire Motorcycle Pink (P) gets connected to the ELFR-1 & Black wire Motorcycle Black is not used). Yamaha: Roadstar line, V-Star - hard wire installation as follows when replacing OEM relay with our Electronic LED Flasher Relay: (Motorcycle Brown wire to ELFR-1 Red wire and Motorcycle Brown/white stripe wire to ELFR-1 Black wire) |
