Performance DC CDI for 150cc

Performance DC CDI for 150cc

Performance DC CDI for 150cc

Our Price: $54.95

Part Number150DCCDI
Performance DC CDI for 150cc Hammerhead. GL/GTS


This 150cc C.D.I is for the DC-FIRED system used on the majority of the 150c Hammerhead and American Sport Works vehicles. This 150cc performance CDI has a rev limit to 9000rpm and advance the timing up 4 degrees. This will work if your CDI part # is 6.000.267. This will NOT work if your CDI part # is 6.000.125

The Performance CDI will plug directly into your stock wiring harness. However, please be aware that the CDI's larger size may necessitate relocating it elsewhere inside your electrical box.

**CDI may not look exactly like picture, as sometimes the factory sends us different variations of this performance CDI**

How to tell if you have a DC CDI:

Your CDI has two plugs, a 4-pin and a 2-pin. The 4-pin side may have 3 or 4 wires connected to it (both AC and DC versions). If the 2-pin connector has only 1 wire going to it, then the vehicle is using a DC CDI. If there are 2 wires attached to the 2-pin connector, then the vehicle is using an AC CDI.

PLEASE NOTE: A very few DC-powered CDI systems will have two wires on the two-pin connector. For these systems, please check to see if your headlights will work while the engine is not running, and if your stock CDI has "DC" printed anywhere on it. In these cases you will need a DC CDI.
Send to friend

Product rating

Customer Reviews

There have been no reviews for this product.

Street Bike Parts and Accessories